Adapting a V60 Recipe for the Kalita Wave
Learn how to adjust your favorite Hario V60 recipe for the flat-bottom Kalita Wave. Discover key differences in grind size, pouring sequence, and brew ratios, with step-by-step guidance to adapt and record your results.
Contents
- Why the V60 and Kalita Wave Brew Differently
- Understanding Your Starting Point: The V60 Recipe
- Step-by-Step: Adapting the Recipe
- Step 1: Keep the Coffee-to-Water Ratio the Same
- Step 2: Adjust the Grind Size Slightly Coarser
- Step 3: Modify the Pouring Sequence
- Step 4: Brew and Compare
- Key Variables to Adjust One at a Time
- Comparing Brewers Side by Side
- Keeping a Brew Journal
If you have a beloved Hario V60 recipe and want to brew it on a Kalita Wave, the key is to understand how the two brewers differ and make small, systematic adjustments. Start with your existing V60 recipe—same coffee-to-water ratio and water temperature—but grind the coffee a bit coarser and adjust your pouring to suit the flat-bottom design. The Kalita Wave drains more slowly and evenly than the cone-shaped V60, so you'll likely need a coarser grind to avoid over-extraction and a slightly gentler pour to maintain an even bed. Below, we’ll break down why these changes work and how to fine-tune them to your taste.
Why the V60 and Kalita Wave Brew Differently
The Hario V60 is a cone-shaped brewer with a single large hole at the bottom and spiral ridges. This design allows water to flow through quickly and encourages a high, narrow coffee bed, so finer grinds and a technique that maximizes flow are often used. The Kalita Wave, in contrast, is a flat-bottom brewer with three small holes and a wavy filter that keeps the paper away from the walls. This creates a shallower, more even coffee bed and slower, more uniform drainage. Because water stays in contact with the coffee longer in the Kalita, a coarser grind is typically needed to achieve a similar extraction level as the V60.
Understanding Your Starting Point: The V60 Recipe
Before adapting, write down your V60 recipe completely. Include the coffee-to-water ratio (e.g., 1:16, meaning 1 gram of coffee for every 16 grams of water), the total coffee dose and water weight, your grind size (described by your grinder setting or particle feel, not just “medium”), water temperature, and your pouring sequence (e.g., a 45-second bloom with 50g water, then two main pours). This record is your baseline for comparison. If you don’t have a set recipe, use a common starting point: 15g coffee to 250g water (1:16.7), water at 93°C (200°F), medium-fine grind, and a bloom plus two pours.
Step-by-Step: Adapting the Recipe
Step 1: Keep the Coffee-to-Water Ratio the Same
Start with the identical coffee-to-water ratio you use for the V60. This is the most fundamental variable for strength, and changing it at the same time as other factors makes it hard to know what caused a difference. For example, if your V60 recipe uses 20g of coffee to 320g of water (1:16), use exactly that on the Kalita Wave.
Step 2: Adjust the Grind Size Slightly Coarser
Because the Kalita Wave drains more slowly, your V60 grind will likely cause over-extraction (bitter, dry, or harsh flavors) on the Kalita. Start by moving your grinder one to two clicks coarser—or visually, aim for a texture slightly coarser than table salt rather than close to fine sand. If you use a hand grinder, this might be a quarter turn. The goal is to find a grind where the total drawdown time (the time from first pour to water disappearing from the top of the coffee bed) is close to your V60 time, usually 2:30–3:30 for a single cup.
Step 3: Modify the Pouring Sequence
Many V60 recipes rely on a high, aggressive pour or a continuous circular pour to agitate the slurry and speed flow. The Kalita Wave’s flat bottom and restrictive holes require a gentler approach. Use a lower pour height and slow, concentric circles, staying away from the edges to avoid washing grounds onto the filter walls. Keep the same number of pours and timing structure as your V60 recipe if possible. For example, if your V60 uses a 45-second bloom with 3x coffee weight in water, then two equal pours to total weight, repeat that on the Kalita, but pour more slowly. If you encounter clogging or very slow drainage, reduce the number of pulses.
Step 4: Brew and Compare
Brew one cup with these adjustments. Taste it side by side with a V60 brew of the same coffee if possible. Note any differences in sweetness, acidity, body, and finish. Also record the drawdown time. If the Kalita brew is too weak or sour (under-extracted), grind finer or increase agitation slightly. If it is too bitter or dry (over-extracted), grind coarser or use fewer pours.
Key Variables to Adjust One at a Time
When fine-tuning, change only one variable per brew so you can attribute the result correctly. The most common order is:
- Grind size: Start coarser; adjust to bring drawdown time close to your V60 baseline.
- Pouring sequence: Reduce aggressiveness; consider fewer, slower pours if channeling occurs.
- Water temperature: If you still get over-extraction, lower the temperature by 1–2°C. This is usually a last tweak for this adaptation.
Comparing Brewers Side by Side
Use this table as a quick reference for the main differences that affect recipe adaptation:
| Variable | Hario V60 | Kalita Wave |
|---|---|---|
| Brewer shape | Cone-shaped, single large hole | Flat-bottom, three small holes |
| Flow rate | Faster, highly influenced by pour | Slower, more controlled by holes |
| Typical grind relative to each other | Finer (medium-fine) | Coarser (medium) |
| Pouring style | Can be aggressive, high agitation | Gentle, low pour, even saturation |
| Common recipe differences | More pulses, finer grind | Fewer pulses, coarser grind |
Keeping a Brew Journal
To make adaptation systematic and enjoyable, keep a simple brew journal. For each brew, record: date, coffee (origin and roast), dose and water weight (coffee-to-water ratio), grinder setting and grind description, water temperature, exact pouring structure (bloom amount and time, number and size of pours), total drawdown time, and your taste notes. After a few brews, you will see patterns and develop your own Kalita Wave version of the recipe.
Adapting a V60 recipe to the Kalita Wave is less about strict rules and more about understanding how the flat-bottom brewer behaves. Start with your familiar ratio, coarsen the grind, soften your pour, and let your taste guide each small change. The result is a slightly different cup—often rounder and sweeter—but equally satisfying.
Related articles
How to Adapt a Coffee Recipe to a Different Brewer
Learn how to translate a coffee recipe from one brewer to another by adjusting ratio, grind size, brew time, and technique. A practical guide for pour-over, immersion, and batch brewers.
Adapting Pour-Over Coffee Recipes for Immersion Brewing
Learn how to convert a pour-over coffee recipe for the French press, AeroPress or Hario Switch by adjusting ratio, grind size, steep time and agitation one step at a time.