# Filter and Drip Brew Ratio

Learn a starting brew ratio for filter and drip coffee, how drip and pour-over ratios differ, and how to adjust grams of coffee per liter of water.

A filter and drip brew ratio is the weight of coffee compared to the weight of water, and a sensible starting point is about 60 grams of coffee per liter of water. Drip machines and pour-over cones share that base but reward slightly different adjustments. Weighing both coffee and water keeps the recipe repeatable from one brew to the next. 

- Start near 60 grams of coffee per liter of water, which is roughly 1:17 by weight.
- Weigh coffee and water in grams rather than relying on scoops or marks on a carafe.
- Use a slightly tighter ratio for drip machines and a slightly wider one for pour-over.
- Change one variable at a time and record the result so you can repeat a brew you like.
- Taste is the final guide: adjust the ratio before changing grind or temperature.
 

## What a brew ratio means 

A brew ratio expresses how much coffee you use for a given amount of water, written as coffee to water. The ratio is a weight comparison, so it stays the same whether you brew a small cup or a full carafe. Baristas write it with the coffee figure first, as in 1:17. 

The same ratio can be written as grams of coffee per liter of water, which many recipes use. At 1:17, a liter of water takes about 60 grams of coffee. The two forms describe one relationship, so pick the one you find easier to scale. 

Weight is more reliable than volume because ground coffee settles and scoops vary in how much they hold. A digital scale that reads to a tenth of a gram removes that uncertainty. Water is best weighed too, since a milliliter of water weighs about a gram. 

## Starting ratio for filter coffee 

Filter coffee brews well from a starting ratio of about 60 grams of coffee per liter of water. That figure sits in the middle of the range where filter methods extract evenly. Treat it as a reference, not a fixed rule, and taste before you change it. 

A tighter ratio, with more coffee for the same water, gives a stronger and heavier cup. A wider ratio, with less coffee, gives a lighter body and lets delicate flavors show. Move in small steps, around two to three grams per liter, so you can tell what changed. 

Grind size and water temperature affect extraction as much as the ratio does. A ratio that tastes weak may come from too coarse a grind rather than too little coffee. Adjust the ratio once the grind and temperature are in a sensible place. 

## Drip brewer ratio compared with pour-over 

Drip and pour-over ratios differ mainly because the two methods move water through the coffee bed in different ways. A drip brewer releases water in a steady shower and holds heat inside the machine. A pour-over cone depends on how you pour and how the bed drains. 

A drip brewer often suits a slightly tighter ratio, nearer 1:16, because its flat bed and steady flow extract a little less of the fine aromatics. Pour-over often suits a slightly wider ratio, nearer 1:17, because the brewer keeps more control over contact time. These are starting points, and the difference is small. 

The gap between drip and pour-over narrows when both use the same water and the same coffee. If your pour-over tastes sharper than your drip brew at the same ratio, the cause may be grind or pour technique. Compare the methods at one ratio before you decide how to split them. 
| Method | Starting ratio | Coffee per liter | 
| Drip brewer | 1:16 | About 63 grams | 
| Pour-over | 1:17 | About 60 grams | 
| Batch filter brew | 1:17 | About 60 grams |  

## How to set the ratio step by step 

Setting a brew ratio starts with deciding how much brewed coffee you want in the cup. Multiply that volume by the ratio to get the water weight, then divide by the ratio to get the coffee dose. Write both numbers down before you grind. 

Place the brewer on the scale, tare it, and add the coffee until the dose matches your figure. Tare again, then pour water until the scale shows your target weight. Recording both numbers makes the next brew a repeat rather than a guess. 

Taste the result at a temperature you can sip comfortably. If the cup is thin, tighten the ratio slightly, and if it is heavy or bitter, widen it. Change only the ratio on the first adjustment so the effect is clear. 

- Decide the brewed volume you want
- Choose a starting ratio such as 1:17
- Calculate water weight and coffee dose
- Weigh coffee on a tared scale
- Weigh water as you brew
- Taste and note the result
- Adjust the ratio by a few grams next time
 

## Adjusting the ratio by taste 

Taste tells you which direction to move the ratio, and the signals are fairly clear. A sour or hollow cup suggests the coffee is under-extracted or there is too little of it. A harsh or drying finish suggests too much coffee or too fine a grind. 

Tighten the ratio when you want more strength and body from the same beans. Widen the ratio when you want a cleaner cup that shows acidity and origin character. Make one adjustment per brew so you learn what each change does. 

Keep a short log of dose, water weight and your impression of the cup. Notes turn taste into a recipe you can return to. A log also shows whether a change in beans or grind is behind a shift in flavor. 

## Scaling a recipe up or down 

Scaling a brew ratio keeps the relationship between coffee and water the same at any batch size. For a small cup, multiply the water weight by the coffee fraction of the ratio. For a large batch, do the same and check that your brewer can hold the bed. 

A brewer loaded with too much coffee may drain slowly and extract unevenly. If a larger batch tastes different from a small one, the cause may be bed depth rather than the ratio itself. Keep the ratio and adjust the grind to the batch size. 

Water weight shifts slightly with temperature, but the effect on a home brew is small. Weighing in grams at room temperature is accurate enough for a repeatable recipe. Consistency of method matters more than tiny changes in water density. 

## Mistakes that upset the ratio 

The most frequent ratio error is measuring coffee by volume instead of weight. A scoop of fine grounds holds more coffee than a scoop of coarse grounds, so the dose drifts. Weighing coffee each time removes that drift. 

Another error is ignoring the water that stays in the coffee bed and the brewer. The water you pour is not all the water in the cup, so note your poured weight rather than the carafe mark. This keeps the recipe honest across brewers. 

Changing ratio, grind and temperature in one brew hides which change mattered. Adjust one variable, taste, then decide the next move. A written record of each brew is the simplest way to avoid repeating a mistake. 

## Keeping the ratio repeatable 

A repeatable ratio depends on the same scale, the same scoop-free dosing and the same water each time. Store your recipe where you brew so you do not rely on memory. Good notes make a small ritual out of each adjustment. 

Freshness of the coffee changes how a ratio behaves, so note the roast date with your recipe. Coffee that has rested longer may need a slightly tighter ratio to taste as full. Treat the ratio as one part of a recipe that includes grind, water and method. 

Rinse the brewer and keep the filter free of old grounds before a brew. A clogged filter slows drainage and alters extraction, which can look like a ratio problem. Clean equipment keeps the numbers meaningful. 

## Filter and Drip Brew Ratio Questions 

### What is a brew ratio for drip coffee? 

A brew ratio for drip coffee is the weight of coffee compared to the weight of water. A starting point is about 60 grams of coffee per liter of water, which is roughly 1:17. A drip brewer often suits a slightly tighter ratio, near 1:16, for more body. 

### What brew ratio should I use for filter coffee? 

A filter coffee ratio of about 1:17 is a sensible starting point for most filter methods. That means roughly 60 grams of coffee for each liter of water. Taste the cup and tighten or widen the ratio by a few grams per liter. 

### How does drip versus pour-over ratio differ? 

Drip versus pour-over ratio differs only slightly, because both methods use the same coffee to water relationship. Drip brewers often do well near 1:16 for a fuller cup. Pour-over often does well near 1:17, where control over pouring lets delicate flavors show. 

### Should I use grams of coffee per liter of water? 

Yes, grams of coffee per liter of water is an easy way to write and scale a recipe. It removes volume errors from scoops and carafe marks. Multiply the liter figure by the fraction of your ratio to find the dose for any batch. 

### How do I adjust the ratio if my coffee tastes weak? 

A weak cup usually means the ratio is too wide or the grind is too coarse. Tighten the ratio by adding a few grams of coffee per liter and taste again. If strength does not improve, adjust the grind before changing the ratio further. 

### Can I use the same ratio for a small cup and a full carafe? 

Yes, the same coffee to water ratio works at any batch size, though a full carafe may need a coarser grind. Keep the ratio fixed and let grind and brew time follow the batch size. Note the poured water weight so the recipe stays accurate.
