Milk and Plant-Based Coffee Drinks: Names, Recipes, and Comparison Chart
A practical guide to classic milk-based espresso drinks—latte, cappuccino, flat white, cortado, latte macchiato—with recipes, plant-based alternatives, and a comparison chart to help you brew your perfect cup.
Contents
- What are the main coffee drinks with milk and espresso?
- How do brewing ratios shape each drink?
- Coffee drinks with milk chart: a quick comparison
- How to make milk-based coffee drinks at home
- Step-by-step basic recipe for a latte
- How to adjust for a cappuccino or flat white
- Coffee drinks with milk on the bottom: the layered latte macchiato
- Plant-based milks: what to expect in your coffee
- How to choose and steam plant-based milk
- Practical tips for your coffee ritual
Classic coffee drinks with milk are built on just two elements: espresso and steamed milk. The differences between a latte, cappuccino, flat white, cortado, and latte macchiato come down to ratio, milk texture, and layering. This guide explains each drink, gives practical recipes, and includes a comparison chart so you can see at a glance how they relate—and how to adjust one variable at a time to find your favourite.
What are the main coffee drinks with milk and espresso?
These five drinks use the same ingredients but different proportions and preparation:
- Latte: 1 part espresso to 4–5 parts steamed milk with a thin layer of microfoam. Smooth, mild, and milky.
- Cappuccino: Equal thirds of espresso, steamed milk, and milk foam. Stronger espresso flavour with a light, airy texture.
- Flat white: 1 part espresso to 2 parts steamed milk with very fine microfoam (no stiff foam). Velvety and intense coffee flavour.
- Cortado: 1 part espresso to 1 part lightly steamed milk with little to no foam. Balanced and bold.
- Latte macchiato: Steamed milk poured first, then espresso added on top, creating layers. Sweeter milk taste with a coffee hit through the foam.
How do brewing ratios shape each drink?
The espresso-to-milk ratio is the biggest factor. A cortado (1:1) tastes mostly like espresso with a creamy edge; a latte (1:4 or more) is gentle and milky. Brewing ratios are usually given by volume for espresso drinks. A standard espresso shot is about 30 ml (1 oz). From there, you can measure milk in millilitres or ounces. For example, a flat white uses about 60 ml (2 oz) milk for a double shot, while a latte uses 240–300 ml (8–10 oz). Small changes—say, using 200 ml instead of 250 ml of milk in a latte—make the coffee flavour noticeably stronger.
Coffee drinks with milk chart: a quick comparison
This chart summarises the key differences. Ratios are approximate and based on a single 30 ml espresso shot.
| Drink | Espresso (ml) | Milk (ml) | Ratio | Foam | Texture & notes |
|---|---|---|---|---|---|
| Cortado | 30 | 30 | 1:1 | Little/none | Smooth, bold, equal parts |
| Flat white | 30 | 60 | 1:2 | Very fine microfoam | Velvety, strong coffee |
| Cappuccino | 30 | 30 steamed + 30 foam | 1:1:1 | Thick, airy foam | Light body, strong espresso |
| Latte | 30 | 120–150 | 1:4–1:5 | Thin microfoam | Creamy, mild |
| Latte macchiato | 30 (poured on top) | 120–150 (poured first) | 1:4–1:5 | Foam layer on top | Layered, sweet milk |
Remember: cup size matters. A “large” latte in a café may use a double shot (60 ml) and up to 300 ml milk, keeping the ratio similar.
How to make milk-based coffee drinks at home
You don’t need a professional machine—a stovetop espresso maker or strong brewed coffee works too. The key steps are the same: extract espresso, steam milk to the right texture, and combine in the right order.
Step-by-step basic recipe for a latte
- Brew a double espresso (60 ml) into a warmed 250–300 ml cup.
- Steam 200–240 ml milk until it reaches about 60–65°C and has a thin layer of microfoam (tiny bubbles, glossy surface).
- Pour the steamed milk into the espresso slowly, holding back the foam with a spoon, then spoon a little foam on top if desired.
- Taste. If too milky, reduce milk next time or increase espresso to a double shot.
How to adjust for a cappuccino or flat white
- For a cappuccino: steam milk with more air to create stiff foam (about double the volume). Pour steamed milk first, then top with a thick layer of foam. Use equal parts espresso, steamed milk, and foam.
- For a flat white: steam milk with very little air (microfoam only, no visible bubbles). Use a 1:2 ratio of espresso to milk in a smaller cup (150–180 ml total).
- For a cortado: heat milk gently without stretching (adding air), then pour equal parts espresso and milk into a small glass. No foam needed.
- For a latte macchiato: pour steamed milk with a foam cap into a tall glass first, then slowly pour espresso through the foam. The espresso will sink, creating visible layers.
Coffee drinks with milk on the bottom: the layered latte macchiato
“Coffee drink with milk on bottom” usually refers to a latte macchiato. The word macchiato means “stained” or “marked” in Italian—here, the milk is “stained” by the espresso. To get the layers:
- Steam milk and pour it into a clear glass, filling it about ¾ full.
- Allow the milk to settle for 20–30 seconds so foam rises to the top.
- Slowly pour a single or double espresso directly through the foam. The espresso is hotter and less dense than the steamed milk, so it floats between the milk and foam, creating three visible layers: milk on bottom, espresso in the middle, foam on top.
Drink without stirring to experience the changing flavours—first milky foam, then strong espresso, then sweet milk.
Plant-based milks: what to expect in your coffee
Plant-based milks behave differently in coffee because of their protein, fat, and sugar content. Some curdle with heat or acidity; others froth poorly. The most common options:
- Oat milk: Naturally sweet, steams well, and creates a creamy microfoam. A barista favourite for lattes and flat whites.
- Soy milk: High protein, steams and froths almost like dairy. Can curdle if poured too quickly into very hot espresso—add a splash of milk first.
- Almond milk: Light and nutty, but low protein means less stable foam. Use a barista blend for better texture.
- Coconut milk: Rich and sweet but separates easily; whisk while heating and use a higher-fat canned version for frothing.
- Pea milk: Neutral flavour, steams well, and is high in protein. Good if you dislike oat or soy taste.
When substituting plant milk, start with the same ratio as dairy and adjust to taste. You may need 20–30 ml more plant milk to balance bitterness, as plant milks can taste less rich.
How to choose and steam plant-based milk
For any plant milk, choose an unsweetened barista edition if available—these contain stabilisers that help with frothing and prevent splitting. Heat slowly to 55–60°C; overheating causes curdling. If the milk separates in coffee, try pouring espresso into the milk instead of the other way around, or let the espresso cool for 30 seconds before combining.
Practical tips for your coffee ritual
Finding your perfect cup is about small changes and noting what you like. Try these experiments:
- Change one variable at a time: keep the espresso dose the same, but use 50 ml more or less milk. Notice how the coffee intensity shifts.
- Record your ratios: write down the grams of coffee, the shot time, and the millilitres of milk. A simple note like “18 g coffee, 36 g espresso, 180 ml oat milk” helps you repeat or adjust.
- Compare side by side: make a cortado and a flat white with the same beans. Which mouthfeel do you prefer—heavier creaminess or sharper espresso?
- Respect temperature: milk steamed to 60–65°C tastes sweet; above 70°C it scalds and loses sweetness. Use a thermometer until you can judge by touch.
There is no single “correct” drink—only the one that suits your taste. Use the chart as a starting point, then tweak the milk amount, foam texture, or plant milk type until it feels right.