THE PERSONAL BREW BENCH

Using the Delter Cold Drip Coffee Maker

A practical guide to brewing cold drip coffee with the Delter, covering ratios, grind size, brew time, and simple adjustments for a satisfying cup.

5 min readCold Drip Coffee6 viewsUsing the Delter Cold Drip Coffee Maker
— · 0 votes
Contents
  1. What Is Cold Drip Coffee?
  2. How Does the Delter Cold Drip Maker Work?
  3. Choosing Your Coffee Dose and Grind Setting
  4. Setting the Water Quantity and Drip Rate
  5. How Long Should the Brew Take?
  6. Understanding Your Beverage Yield
  7. Step-by-Step Brewing Guide
  8. Comparing Cold Drip Ratios and Results
  9. Small Adjustments That Change Your Cup
  10. Keeping a Coffee Log
  11. Making Cold Drip a Ritual

The Delter Cold Drip Coffee Maker is a compact, elegant device that uses slow, cold water dripping through a bed of coffee grounds to produce a smooth, low-acid concentrate. To get started, use a coffee dose of about 40–50 g of medium-coarse ground coffee and 500 ml of cold water, with an ice-water mixture in the top chamber. Adjust the drip valve to roughly 1 drop per second, and expect a brew duration of 3–5 hours. The resulting beverage yield is around 400–450 ml of cold drip concentrate, which you can dilute with water or milk to taste.

What Is Cold Drip Coffee?

Cold drip coffee, also known as Dutch coffee or Kyoto-style coffee, is made by slowly dripping cold water through a bed of coffee grounds over several hours. Unlike cold brew immersion, where grounds steep in water, cold drip continuously extracts flavor as water passes through. This method emphasizes delicate aromas, sweetness, and a clean, tea-like body, with much lower acidity and bitterness than hot-brewed coffee.

How Does the Delter Cold Drip Maker Work?

The Delter Cold Drip has three main parts: a top water chamber, a middle coffee bed, and a bottom carafe. You fill the top with ice and cold water, which melts and drips through a small valve onto a dispersion plate. The water then seeps evenly through the coffee grounds and drips into the carafe below. A simple dial controls the drip rate, giving you hands-on control over extraction.

Choosing Your Coffee Dose and Grind Setting

Start with 50 g of coffee and a medium-coarse grind—similar to sea salt or coarse sand. If your grinder has numeric settings, aim for around 20–24 on a Baratza Encore or a similar medium-coarse range. Too fine a grind can clog the filter and over-extract, while too coarse may produce weak, under-extracted coffee.

If you prefer a lighter, more delicate cup, use 40 g of coffee with the same water volume. For a stronger concentrate, increase to 60 g. Keep notes and adjust only one variable at a time.

Setting the Water Quantity and Drip Rate

Fill the top chamber with a total of 500 ml of water—ideally a mix of about 200 g of ice and 300 ml of cold filtered water. The ice keeps the water near 4°C during the long drip, slowing extraction and preserving delicate flavors. Set the drip valve to approximately 1 drop per second. If the drip is too fast, extraction will be weak and sour; too slow can lead to over-extraction and bitterness.

How Long Should the Brew Take?

With 50 g of coffee and a drip rate of 1 drop per second, the brew duration is typically 3–5 hours. The exact time depends on your grind size, coffee dose, and drip rate. A coarser grind or faster drip shortens the brew; a finer grind or slower drip lengthens it. Start with the recommended settings and adjust based on taste.

Understanding Your Beverage Yield

Because the coffee grounds retain some water, your final beverage yield will be less than the water you added. Expect around 400–450 ml of concentrate from 500 ml of water. This concentrate is strong and often enjoyed over ice, diluted 1:1 with water or milk, or used as a base for coffee cocktails.

Step-by-Step Brewing Guide

  1. Weigh 50 g of coffee and grind it medium-coarse.
  2. Assemble the Delter: place the filter in the coffee bed, then add the ground coffee and gently level the surface. Place the dispersion plate on top.
  3. Fill the top chamber with 200 g of ice and 300 ml of cold filtered water. Place it on the coffee bed.
  4. Set the drip valve to roughly 1 drop per second. You may need to adjust it slightly during the brew as the water level drops.
  5. Place the carafe underneath and let it brew for 3–5 hours, checking occasionally.
  6. When the top chamber is empty, remove the coffee bed and discard the grounds. Stir the concentrate in the carafe.
  7. Serve over ice, diluted to your preference, or store in the fridge for up to a week.

Comparing Cold Drip Ratios and Results

Coffee DoseWater QuantityGrind SettingBrew DurationBeverage YieldFlavor Profile
40 g500 mlmedium-coarse2.5–4 hours~430–460 mlLighter, more delicate, tea-like
50 g500 mlmedium-coarse3–5 hours~400–450 mlBalanced, sweet, rounded
60 g500 mlmedium-coarse3.5–5.5 hours~380–430 mlStronger, more intense, syrupy

Small Adjustments That Change Your Cup

Because cold drip is slow, even tiny changes are magnified. Try these one at a time:

  • Grind coarser if the coffee tastes bitter or harsh—this reduces extraction.
  • Grind finer if the coffee is weak or sour—this increases extraction.
  • Slow the drip to increase contact time and body.
  • Speed up the drip for a cleaner, lighter cup.
  • Use more ice in the top chamber to keep the water colder for longer.

Keeping a Coffee Log

To learn your preferences, record these details for each brew:

  • Coffee dose (g)
  • Grind setting
  • Water quantity and ice amount
  • Drip rate (drops per second)
  • Brew duration
  • Beverage yield
  • Tasting notes: acidity, sweetness, bitterness, mouthfeel

Over a few sessions, you will spot patterns and be able to recreate the cup you enjoy most.

Making Cold Drip a Ritual

Cold drip rewards patience. Set up the brewer in the evening and let it work overnight; in the morning, you will have a ready concentrate. The quiet, steady drip can be a calming presence, and the act of adjusting the valve and checking the progress becomes a small, mindful ritual. Serve the result in a clear glass to appreciate its color and clarity.

Related articles