Cold-brew concentrate and dilution records
How to set a cold brew ratio by weight, brew a concentrate, dilute it with water or milk, and record recipe, yield and additions so each batch can be repeated or adjusted.
Contents
- What a cold brew ratio does, and when to make concentrate
- Ratios reported in published guides
- What does a 1 to 8 ratio mean for cold brew?
- Measuring in grams, by volume, or in cups
- Working out grams for any batch size
- Making the concentrate
- How much water or milk to mix with concentrate
- Keeping the record
- Judging the result and changing course
- Safety and what remains unverified
Cold brew involves two numbers. The brew ratio sets how much coffee steeps in how much water. The dilution ratio sets how much water or milk goes into the finished concentrate before you drink it. Published guides mix these up, and the same number can mean different things. A written record of both, plus what the batch actually produced, lets you repeat a good batch or change one variable at a time.
What a cold brew ratio does, and when to make concentrate
A brew ratio is written as coffee to water, usually by weight. 1:4 means 1 gram of coffee for every 4 grams of water. A lower second number makes a stronger brew. Guides describe two approaches. A concentrate is brewed strong and diluted before drinking. Ready-to-drink cold brew is brewed weaker and poured as is.
Concentrate makes sense if you want one strong base that you can thin with water or milk to different strengths. Ready-to-drink makes sense if you want to pour without a second measuring step. The sources do not show that either approach is better. Choose based on how you plan to serve the coffee.
Ratios reported in published guides
The figures below come from the summaries of published cold brew guides and calculators. They vary from source to source. None of them is a proven single best ratio, so treat them as starting points to record and adjust.
| Purpose | Coffee : water (by weight unless noted) | Note |
| Concentrate | 1:4 | One guide calls this ideal; another gives 100 g coffee to 400 g water as a worked example |
| Concentrate | 1:4 to 1:5 | Described by two sources as the common or industry-standard range |
| Concentrate | 1:5 | Described by one guide as the classic way to make concentrate |
| Concentrate | 1:5 to 1:6 | One calculator, given as 1 g coffee to 5–6 ml water |
| Brewed to be diluted later | 1:8 | One guide's preference, with filtered water |
| Ready to drink | 1:7 to 1:8 | One source; another gives 1:8 as the ready-to-drink ratio that suits most people |
| Ready to drink, medium strength | 1:15 | One cold brew maker calculator: 67 g coffee to 1000 ml water for a 1.0 L maker |
What does a 1 to 8 ratio mean for cold brew?
1:8 means 1 gram of coffee for every 8 grams of water. Sources disagree on what you get. Two treat 1:8 as ready-to-drink strength. A third treats it as a base to dilute later. Because of this, write down whether you intend to drink a batch as is or dilute it. Do not assume the label settles the question.
Measuring in grams, by volume, or in cups
Weighing both coffee and water is the most reliable way to keep records. One source notes that 1 ml of water weighs about 1 g, so you can measure water in milliliters and log it in grams without converting.
Coffee is different. The sources give no conversion from cups or spoons of ground coffee to grams. Volume measures of grounds therefore cannot be checked against the ratios above. For water only, 1 liter is a little over 4 US cups. One home brewer was unsure about this conversion while reading the instructions on a carafe package.
Working out grams for any batch size
Any ratio calculator does the same arithmetic. Decide how much water you will steep with, then divide by the second number of the ratio.
coffee (g) = water (g) / ratio
water (g) = coffee (g) x ratio
1:4 with 400 g water -> 100 g coffee
1:5 with 1000 g water -> 200 g coffee
1:8 with 800 g water -> 100 g coffee
Making the concentrate
The sources support only part of the method. Use the steps below. Where a detail is missing, the step says so instead of guessing.
- 1. Decide whether this batch is a concentrate to dilute or a ready-to-drink brew, and write that down first.
- 2. Choose a brew ratio from the range for that purpose, then weigh the water and calculate the coffee.
- 3. Use coarsely ground coffee, as two sources specify. They give no more precise grind setting. One guide uses filtered water.
- 4. Combine the coffee and water in your brewing vessel. If you use a dedicated cold brew maker or carafe, follow its instructions for capacity and filtering.
- 5. Steep. One source gives 12 to 18 hours for a 1:4 concentrate. The sources do not say whether to steep at room temperature or in the refrigerator.
- 6. Separate the liquid from the grounds. The sources do not describe a filtering method, so rely on your equipment's instructions.
- 7. Measure and record how much concentrate you actually collect. The sources give no expected yield.
How much water or milk to mix with concentrate
Dilution ratios are written the other way round: concentrate first, then water. One guide says most people prefer between 2:1 and 1:1 concentrate to water, and recommends 2:1 for stronger coffee. Another says concentrate brewed at 1:4 to 1:5 is diluted 1:1 with water or milk. Two sources name milk as a dilution option. Neither gives a separate ratio for milk, so 1:1 is the only milk figure the sources support.
- 1:1 – equal parts concentrate and water or milk
- 2:1 – two parts concentrate to one part water, for a stronger drink
Apply the dilution ratio to the concentrate you collected, not to the water you started with. Since the yield is not given in the sources, you cannot reliably calculate one combined coffee-to-total-water figure from the recipe alone. Log the brew ratio and the dilution ratio as two separate numbers.
Keeping the record
A useful log holds the inputs, the measured output, and what you added at serving time. Record measurements, not estimates. Do not add caffeine content or a shelf life to the record, because none of the sources supports those figures.
Date brewed:
Coffee (name / roast):
Grind: e.g. coarse
Coffee weight (g):
Water weight (g):
Brew ratio: 1:__
Intended use: concentrate / ready to drink
Steep start / end:
Steep location: room / refrigerator
Concentrate collected (g or ml):
Dilution: __ concentrate : __ water or milk
Result notes:
Change for next batch:
Judging the result and changing course
The sources give no visual or measured cue that shows when steeping is finished, apart from the 12 to 18 hour window that one source gives. In practice, you judge the result by tasting the diluted drink and comparing it with your notes.
Change only one variable per batch. For example, one home brewer followed a carafe's printed recipe of 85 g of beans to 1 L of water, which works out to about 1:12. They found it strong and used 70 g for the next batch, about 1:14. That is the kind of adjustment a log makes easy to track. If a finished drink tastes too strong, you can also move from a 2:1 dilution toward 1:1 before changing the brew recipe.
Safety and what remains unverified
The sources give no guidance on safe steeping temperature, refrigeration, how long concentrate or milk-diluted coffee keeps, or caffeine content. This guide therefore makes no claims on those points. Follow the instructions for your brewing equipment, and look to authoritative food-safety guidance before deciding how to store a batch.
Read next
Record a Bruer cold-drip brew from setup to beverage yield
A practical log for a Bruer cold-drip session: method check, Bruer's setup quantities, drip-rate counting, timing events, collected beverage and cleanup notes.
Organize Existing Coffee Equipment Around Your Brewing Workflow
Set up a DIY home coffee station using only what you own: map your brewing sequence, group tools by use, check placement, and record a repeatable routine.
Keep a personal tasting record as one coffee brew cools
A practical guide to recording successive tasting notes from a single coffee brew as it cools, using elapsed time, measured temperatures and clear comparisons.
Identify and record your espresso machine's preinfusion phase
How to find your espresso machine's documented preinfusion phase, copy its controls and units, and log observed phase events in a brew journal tied to each shot.
Interpret and record espresso pressure readings in context
Looking for the optimal bar pressure for espresso? Learn what your gauge actually measures, how to tell a setting from a reading, and how to log pressure so your numbers can be compared.
Record espresso basket dimensions, dose ratings and headspace
58mm espresso baskets share a diameter but differ in depth and dose range. How to record basket specs, actual doses and headspace checks without guessing at fit.
Record espresso pressure and flow profiles as separate observations
Build a stage-by-stage espresso profile record that keeps intended settings, measured pressure, measured flow and inferred curve segments apart.
Record a Nel Drip Recipe, Pouring Sequence and Beverage Yield
Build a cloth-filter brewing journal that keeps the author's nel drip method intact, logs each pour and pause as it happens, and records beverage yield as its own measurement.
Build a model-specific percolator brewing journal
Record your percolator's model, instructions, heat source, brewing events and completion cues so you can repeat a stovetop or electric routine and compare recipes fairly.
Document espresso spraying and uneven flow before changing preparation
Build a repeatable espresso observation record that separates what you saw, like spraying or uneven flow, from what you suspect caused it and what you change next.