THE PERSONAL BREW BENCH

Record espresso pressure and flow profiles as separate observations

Build a stage-by-stage espresso profile record that keeps intended settings, measured pressure, measured flow and inferred curve segments apart.

5 min readBrew journal10 viewsRecord espresso pressure and flow profiles as separate observations
— · 0 votes
Contents
  1. Why the separation matters
  2. Columns for a profile record
  3. Recording a shot stage by stage
  4. How a published example breaks into stages
  5. Plotting only what you measured
  6. Comparing two profiles fairly

Keep pressure and flow in separate columns, and keep both apart from what you intended the machine to do. A useful espresso profile record notes, for each stage of the shot, three things: the setting or action you chose, the values you actually measured, and any part of the curve you are only inferring. Pressure and flow are different quantities with different units, and they are often read from different places or devices. Putting them on one unlabeled curve, or treating a knob position as a reading, makes it impossible to tell later what actually changed between two shots.

Why the separation matters

Profiling invites changing several things at once, and the record is the only way to untangle them afterward. The coffee writer Jim Seven described using a borrowed profiler on one group of his two-group Synesso. He preferred its automatic mode because it let him repeat a profile and make specific changes. He also found that adding pressure changes made other variables harder to isolate, acknowledged that he had not recorded enough, and said he rarely felt the altered cup was an improvement. That is one person's experiment on one machine, not evidence that profiling helps or hurts flavor. It does show why a careful log matters more than the profile itself: without it, you cannot say which change produced which cup.

A second reason is honesty about what you saw. If you measured pressure at three moments and drew a smooth line between them, the line is your guess. If your machine shows pressure but not flow, any flow figure is an estimate. Labeling each value as measured or inferred keeps an estimate from quietly becoming a fact in your notes.

Columns for a profile record

Use one row per stage of each shot. Keep the units and labels exactly as your gauge, scale or display shows them rather than converting everything onto one scale.

ColumnWhat to write
Shot IDA unique label for the shot, such as a date plus a number
Profile referenceThe named profile, program or written instruction you followed
Stage labelYour name for the phase, such as initial, main or finishing
Start / end eventWhat began and ended the stage: a timer mark, first drops, a lever release, a weight reached
Intended control settingThe setting, program step or lever action you chose
Actual pressureThe reading, its unit and where it was read
Actual flowThe reading, its unit and where it was read, or "not measured"
Measurement deviceThe gauge, sensor, scale or app that produced each reading
Observation intervalHow often or at which moments readings were taken
StatusMeasured, or inferred, for each value or curve segment
Beverage yieldWhat ended up in the cup
Preparation deviationsAnything that differed from plan: grind change, dose error, channeling, a late start

The intended control setting and the actual readings are deliberately separate. A knob position, a dial number or a lever motion describes what you did, so it belongs in the control column. Only move it into a measurement column if your machine's documentation establishes how that control relates to a measured value.

Recording a shot stage by stage

  • Before pulling, write the shot ID, the profile reference, and the coffee, basket, dose and target yield.
  • Decide the stage boundaries in terms of events you can actually observe, not just seconds on a clock.
  • For each stage, write the intended setting first, before you see any readings.
  • During or after the shot, enter pressure readings with their unit, location and device.
  • Enter flow readings the same way, or write "not measured" if you had no way to read flow.
  • Mark any value you calculated, estimated or read off a smoothed curve as inferred.
  • Record the beverage yield and any deviations from your plan.
  • Write your tasting notes in a separate field, after the shot data is complete.

How a published example breaks into stages

The coffee site Quaffee organized its pressure-profiling notes into three phases: an initial phase, a higher-pressure phase, and a finishing decline. Its account includes an 18 g example that started with an initial setting of 2 bar for about eight seconds, and a higher-pressure interval used for one particular coffee. Those numbers are the author's own trials, not a starting recipe for every machine or coffee. In your record, a profile like that would become three stage rows, with "2 bar for about eight seconds" entered as an intended setting. Whether your machine actually delivered 2 bar during that window goes in the pressure column only if you read it.

Plotting only what you measured

Illustrative example: suppose you have pressure readings at three events, A, B and C, and no flow measurement at all. Plot pressure only at A, B and C. If you connect them with a line, label the line as interpolation. Leave the flow track empty instead of sketching what you think it probably looked like. A record for that shot might look like this:

Shot: [date]-03   Profile: three-stage test, version 2

Stage 1  initial      start: pump on       end: event A
  intended:  [setting or action]
  pressure:  [reading] [unit] at [location], [device]   MEASURED at A
  flow:      not measured

Stage 2  main         start: event A       end: event B
  intended:  [setting or action]
  pressure:  [reading] [unit] at [location], [device]   MEASURED at B
             A-to-B line on chart                       INFERRED (interpolation)
  flow:      not measured

Stage 3  finishing    start: event B       end: event C
  intended:  [setting or action]
  pressure:  [reading] [unit] at [location], [device]   MEASURED at C
  flow:      not measured

Yield: [weight]   Deviations: [none / describe]
Taste (separate): [notes]

Comparing two profiles fairly

  • Keep the coffee, basket, dose, target beverage yield and preparation steps the same across both shots.
  • Change one documented element of the profile, such as the length or setting of a single stage.
  • Record the actual pressure and flow observations for both shots in the same format and units.
  • Write taste impressions separately from the measurements, so a preference does not color how you read the data.
  • Use your usual dial-in process to decide whether to keep the change or go back to the previous version.

Before trying any profile, check your machine's manual or the manufacturer's guidance to confirm which controls it supports and how they are meant to be used. A profile written for one machine's controls may not translate directly to another's.

Related articles