Compare espresso adjustments with a controlled shot journal
Use a controlled shot journal to test espresso adjustments one variable at a time, alongside taste guides like the Barista Hustle Espresso Compass.
Contents
- The short answer
- Why a journal beats memory when dialing in
- Keep each quantity in its own column
- Decide your timing convention before you start
- What to record for every shot
- Change one variable, then check that it really was only one
- An illustrative two-shot plan
- A real cafe's coordinates as a reference point
- Using the journal alongside a taste guide
The short answer
People searching for the Barista Hustle Espresso Compass usually want to know which way to adjust a shot after tasting it. A taste-direction guide can suggest a move. A controlled shot journal tells you whether that move did what you expected. The journal records the dose, the beverage you collected, the grind setting, how you timed the shot and what you tasted. You change one declared variable per shot, so when two shots differ you can tell which change caused the difference.
This guide covers how to build and use that journal. It doesn't restate the compass's specific taste-to-adjustment mappings, so use the chart itself for those. Then use the journal to test each suggestion it gives you.
Why a journal beats memory when dialing in
Dialing in espresso means pulling several shots in a row, each slightly different. Without records, it's easy to remember that the third shot tasted better and forget that you also tamped differently or let the grinder purge. A journal turns each shot into a comparable entry. It shows what you meant to change, what you meant to hold steady and what actually happened.
Kuma Cafe, a cafe that has written about its own espresso routine, builds its workflow around three recorded numbers: coffee dose, beverage output and brewing time. Its grind adjustments are informed by those records. The cafe also prefers weighing the beverage over judging it by eye. A scale under the cup gives you a number you can compare from shot to shot. A visual estimate in a shot glass doesn't.
Keep each quantity in its own column
Most journal confusion comes from blending different quantities into one number. Give each its own labeled field:
- Dry coffee dose: the weight of ground coffee in the basket.
- Beverage collected: the weight of espresso in the cup when you stop the shot.
- Water added separately: only if you add water afterward, as for an americano, and recorded apart from the espresso itself.
- Extraction yield: leave this blank unless you measured it with a specific method. Record the method next to the result. Never fill it in from beverage weight alone, because beverage weight is not extraction yield.
Decide your timing convention before you start
Shot time only means something if you start and stop the clock the same way every time. Some people start timing when they press the brew button. Others start at the first drops. Kuma Cafe's published notes give target times but don't say which event starts the clock, which shows how easily this detail gets lost. Name your start and stop events in the journal, such as "start: pump on; stop: scale reads target," and keep them fixed across the shots you plan to compare.
What to record for every shot
| Field | What goes in it |
| Shot ID | A unique label, such as the date plus a letter |
| Baseline recipe ID | The recipe this shot is being compared against |
| Coffee | Bean name and any roast information you have |
| Equipment | Machine, grinder and basket used |
| Actual dose | Measured dry coffee weight |
| Target / actual beverage yield | What you aimed for and what the scale read |
| Grind setting | The grinder's recorded setting |
| Named timing events | Your start and stop events, plus the elapsed time |
| Preparation version | Your distribution, tamping and other prep routine, labeled so changes are visible |
| Taste words | Your own description of the cup |
| Changed variable | The one thing you deliberately altered from the baseline |
| Intended fixed conditions | Everything you meant to keep the same |
| Accidental deviations | Anything that differed from the plan |
| Decision | Repeat, retain or revert |
If you prefer a notebook or a plain text file, the same fields fit on one line per shot:
ID | Base | Coffee | Dose | Target/Actual out | Grind | Timing (start-stop) | Time | Prep | Taste | Changed | Deviations | Decision
A | R1 | Bean 1 | ___ g | ___ / ___ g | X | pump on - scale | ___ | v1 | ___ | baseline| ___ | ___
B | R1 | Bean 1 | ___ g | ___ / ___ g | Y | pump on - scale | ___ | v1 | ___ | grind | ___ | ___
Change one variable, then check that it really was only one
Before you compare two shots, read across the columns you meant to hold steady. Check whether the actual dose, the coffee, the basket, the prep version and the timing convention all matched. If something else shifted, such as a dose that came in heavier or a different tamp, mark the comparison as confounded. Repeat it before deciding that your intended change caused the difference in the cup.
An illustrative two-shot plan
The following is a hypothetical example, not a recommended recipe. Shots A and B both target an 18 g dose and a 36 g beverage output, assuming that dose suits your basket and machine. A uses grinder setting X and B uses setting Y. The coffee, basket, prep routine and timing convention stay the same for both. Before pulling the shots, fill in everything except actual time and taste, and leave those blank until you observe them.
After both shots, check the fixed conditions first. If they matched, compare the recorded times and your taste notes, then choose one decision. Repeat if the result is unclear or the comparison was confounded. Retain setting Y if you prefer it. Revert to X if Y moved the cup the wrong way. Treat a taste word like "sour" or "bitter" as a note about your preference, not as proof of how much the coffee extracted.
A real cafe's coordinates as a reference point
For context, Kuma Cafe reports working with 19 to 19.3 g of coffee and aiming for 30 to 32 g of beverage. In one narrower example it pairs a 19 g dose with a 30 g output and expects 22 to 24 seconds for its particular roast. These are that cafe's own targets for its own coffee and equipment, not universal numbers. They are useful as an example of the kind of specific, recorded recipe a journal entry should contain.
Using the journal alongside a taste guide
- Write down a baseline recipe and pull it, recording every field.
- Taste the shot and note your own words for it.
- Consult your taste-direction guide, such as the Espresso Compass, for a suggested adjustment.
- Translate that suggestion into one declared change, such as grind setting, dose or beverage target, and write it in the Changed variable column before pulling.
- Pull the new shot, then fill in actual values, deviations and taste.
- Check the fixed conditions, then decide to repeat, retain or revert.
- Carry the retained recipe forward as the new baseline ID for the next round.
Related articles
Record a Bruer cold-drip brew from setup to beverage yield
A practical log for a Bruer cold-drip session: method check, Bruer's setup quantities, drip-rate counting, timing events, collected beverage and cleanup notes.
Organize Existing Coffee Equipment Around Your Brewing Workflow
Set up a DIY home coffee station using only what you own: map your brewing sequence, group tools by use, check placement, and record a repeatable routine.
Keep a personal tasting record as one coffee brew cools
A practical guide to recording successive tasting notes from a single coffee brew as it cools, using elapsed time, measured temperatures and clear comparisons.
Identify and record your espresso machine's preinfusion phase
How to find your espresso machine's documented preinfusion phase, copy its controls and units, and log observed phase events in a brew journal tied to each shot.
Interpret and record espresso pressure readings in context
Looking for the optimal bar pressure for espresso? Learn what your gauge actually measures, how to tell a setting from a reading, and how to log pressure so your numbers can be compared.
Record espresso basket dimensions, dose ratings and headspace
58mm espresso baskets share a diameter but differ in depth and dose range. How to record basket specs, actual doses and headspace checks without guessing at fit.
Record espresso pressure and flow profiles as separate observations
Build a stage-by-stage espresso profile record that keeps intended settings, measured pressure, measured flow and inferred curve segments apart.
Record a Nel Drip Recipe, Pouring Sequence and Beverage Yield
Build a cloth-filter brewing journal that keeps the author's nel drip method intact, logs each pour and pause as it happens, and records beverage yield as its own measurement.
Build a model-specific percolator brewing journal
Record your percolator's model, instructions, heat source, brewing events and completion cues so you can repeat a stovetop or electric routine and compare recipes fairly.
Document espresso spraying and uneven flow before changing preparation
Build a repeatable espresso observation record that separates what you saw, like spraying or uneven flow, from what you suspect caused it and what you change next.