THE PERSONAL BREW BENCH

A French press brewing recipe and journal

French press coffee ratios in grams, milliliters and tablespoons, a water temperature range, and a brew journal for recording dose, grind, steep time and tasting notes.

8 min readBrew journal8 viewsA French press brewing recipe and journal
— · 0 votes
Contents
  1. What this brew chart and journal are for
  2. Ingredients and equipment
  3. The perfect French press ratio: what published guides recommend
  4. French press ratio in grams and milliliters
  5. Coffee to water ratio in tablespoons
  6. How many tablespoons of coffee for 32 oz of water?
  7. How much coffee for one cup or two cups?
  8. What reddit says about French press ratios
  9. Water temperature
  10. Method: the steps that can be verified
  11. How to judge the result
  12. Brew journal template
  13. Corrections and adjustments
  14. Is French press coffee stronger, and what are its benefits?
  15. Safety

This guide combines a starting French press recipe with a brew journal. The recipe gives you coffee-to-water ratios and a water temperature range. The journal gives you a place to record each brew so you can repeat a cup you liked or change one variable when you didn't. The ratios and temperature come from published brewing guides. Some details a complete recipe needs, especially steep time, were not available in the source material. Those gaps are marked below, and the journal leaves room to fill them in from your own press's instructions.

What this brew chart and journal are for

Use the chart when you need to work out how much coffee goes with a given amount of water, whether you measure in grams, milliliters or tablespoons. Use the journal when you want consistent results or want to adjust a brew on purpose rather than by guesswork. It is most useful when you brew the same press regularly and want a record of what changed between a good cup and a disappointing one.

Gap: a complete French press brew time chart cannot be provided here. None of the source material gave a steep time, a stirring step or a plunging method. The chart below covers ratios and water temperature. The journal template includes a steep-time column for you to fill in from your press manufacturer's instructions or a full brewing guide you trust.

Ingredients and equipment

  • Whole-bean or ground coffee, ground to a medium grind (one roaster's guide specifies medium)
  • Water
  • A French press (check the manufacturer's instructions for capacity and handling)
  • A kitchen scale, if you are measuring in grams
  • A level tablespoon measure, if you are not using a scale
  • A thermometer, if you want to confirm the water temperature
  • A notebook or printed copy of the journal template below

The perfect French press ratio: what published guides recommend

There is no single correct ratio. The guides consulted agree on a general range but differ on the exact point:

  • One coffee science article: 60 to 70 grams of coffee per liter of water.
  • One roaster's guide: about 1 gram of medium-ground coffee per 13 to 15 grams of water.
  • An equipment maker: 1:15 as the standard, meaning 1 gram of coffee for every 15 grams of water.
  • Another roaster's guide: 1:15 as ideal, partly because it scales easily to presses of different sizes.
  • Another brewing guide: anything from 1:7 to 1:20 is usable, with the ideal starting around 1:16. The upper end of that recommendation was cut off in the source excerpt, so it is not stated here.

Most of these converge on roughly 1:14 to 1:16. Expressed as a ratio, 60 to 70 grams per liter works out to about 1:14.3 to 1:16.7. A ratio of 1:15 is a reasonable first entry in your journal, since two sources call it standard or ideal. The ratio number is simply the amount of water per unit of coffee. A lower number, such as 1:13, means more coffee for the same water. A higher number, such as 1:16, means less.

French press ratio in grams and milliliters

To calculate a dose, divide the water weight by the second number of the ratio. Water weighs about 1 gram per milliliter, so a gram ratio can be read as grams of coffee per milliliter of water for home brewing. The figures below are calculated from the published ratios. They are not separate recommendations.

Water | Coffee at 1:13 | Coffee at 1:15 | Coffee at 1:16
350 g (about 350 ml) | 26.9 g | 23.3 g | 21.9 g
500 g (about 500 ml) | 38.5 g | 33.3 g | 31.3 g
1000 g (about 1 liter) | 76.9 g | 66.7 g | 62.5 g

Coffee to water ratio in tablespoons

Without a scale, one roaster's guide recommends 2 level tablespoons of coffee for every 6 ounces of water. The rows below scale that rule to other water volumes.

Water | Level tablespoons of coffee
6 oz | 2
12 oz | 4
24 oz | 8
32 oz | about 10 2/3

Gap: the source does not say how many grams a level tablespoon of ground coffee weighs. That weight depends on grind and bean, so the tablespoon method cannot be converted precisely into the gram ratios above. If you switch between the two methods, record which one you used in your journal.

How many tablespoons of coffee for 32 oz of water?

At 2 level tablespoons per 6 ounces, 32 ounces of water calls for about 10 2/3 level tablespoons, which rounds to 10 or 11. This calculation assumes fluid ounces of water. The source rule does not specify which kind of ounce it means.

How much coffee for one cup or two cups?

The answer depends on what you mean by a cup, and the sources do not define one. Here are two ways to work it out from the supplied rules:

  • Tablespoon method: one 6-ounce cup takes 2 level tablespoons. Two 6-ounce cups take 4 level tablespoons.
  • Gram method: measure the water you actually want to drink and divide by 15 for a 1:15 ratio. For example, 250 g of water takes about 16.7 g of coffee, and 500 g takes about 33.3 g.

Brewing for one: the sources give no single-serving procedure. The ratio arithmetic still applies to a small batch. Check your press's instructions for any minimum fill level, because that information was not available.

What reddit says about French press ratios

Gap: the only community thread available was a home brewer saying their French press coffee had been alright but disappointing. The replies were not included, so no consensus ratio or fix from that discussion can be reported. The published ratios above are the supported starting point.

Water temperature

One equipment maker's guide recommends water between 195 and 205 °F. The same guide warns that hotter water can affect the flavor it extracts. The rest of that explanation was cut off in the source, so its full reasoning is not repeated here. If you have a thermometer, record the actual water temperature in your journal for each brew.

Method: the steps that can be verified

  • 1. Choose a ratio. 1:15 is a common starting point.
  • 2. Weigh or measure your water, then calculate and measure your coffee using the charts above.
  • 3. Grind the coffee to a medium grind.
  • 4. Heat the water to 195 to 205 °F.
  • 5. Gap: the source material did not cover how to combine coffee and water, whether to stir, how long to steep, how to plunge, or when to pour. Follow the instructions supplied with your French press for these steps, and record what you did in the journal.

Decision points: if you are using a scale, follow the gram path and ignore the tablespoon table. If you are not, use 2 level tablespoons per 6 ounces of water. Keep the same measuring method from one brew to the next so your journal entries can be compared.

How to judge the result

The cues you can verify are measurements: the scale reading for coffee and water, the thermometer reading for the water, and the timer reading for steep time. Gap: the sources describe no visual, aroma or texture cues for a correctly finished French press brew. The journal therefore asks you to record your own tasting notes in your own words rather than check them against a reference standard.

Brew journal template

FRENCH PRESS BREW JOURNAL

Date:            ____________
Coffee / roast:  ____________
Press & size:    ____________

Ratio target:    1:____
Coffee dose:     ____ g   or   ____ level tbsp
Water:           ____ g / ml   or   ____ oz
Grind setting:   ____________   (medium = starting point)
Water temp:      ____ °F        (guide range: 195-205 °F)
Steep time:      ____ min ____ s (from your press instructions)
Stirred? Y / N   Plunge notes: ____________

Tasting notes:   ______________________________
                 ______________________________
What I'll change next time (one variable only):
                 ______________________________

Corrections and adjustments

If a brew isn't to your taste, change one recorded variable at a time so the journal shows what made the difference. The ratio is the adjustment best supported by the sources. Guides cite workable ratios from 1:7 to 1:20, and most cluster around 1:14 to 1:16, so moving within that cluster is a reasonable first adjustment. Gap: the sources do not say which taste problem calls for which change, such as grind, temperature or time. No diagnostic table is offered here.

Is French press coffee stronger, and what are its benefits?

Gap: the sources do not compare French press strength with other brewing methods, and they do not list benefits of using a French press. Neither question can be answered from the supplied evidence. Within the French press itself, the strength of each brew depends largely on the ratio you choose. Recording that ratio in your journal is the most reliable way to compare one brew with another.

Safety

The sources contain no safety or handling guidance. The recommended water is very hot, at 195 to 205 °F. Follow the manufacturer's instructions for your specific French press on filling, plunging, pouring and cleaning, and on the temperature limits of its vessel.

Related articles