Keep a Home Coffee Blend Journal with Measured Proportions
Learn how to record home coffee blends by weight, calculate blend percentages, keep them separate from your coffee-to-water ratio, and compare trials.
Contents
The short answer
A coffee blend journal is a written record of each blend you try at home. For each trial, you note which coffees went in, how many grams of each you used, what share of the blend each one makes up, and how you brewed it. Your notes let you repeat a blend you liked, change it on purpose, or drop it. Weigh every component, turn the weights into percentages, and log the brew separately so you never mix up blend composition with your coffee-to-water ratio.
This guide covers measuring and recording home blends and comparing them through your own tasting notes. It does not recommend specific coffees, fixed proportions or equipment. The right blend is whichever one you prefer, and the journal is how you find it.
A simple blending workflow to record
Coffee writer Mark Morphew describes a straightforward home method. Pick two or three coffees. Weigh the roasted beans and mix them. Then grind and brew a small batch. He also suggests tasting each component coffee on its own before tasting the blend, so you know what each one brings. He recommends writing down the coffees, the proportions, the roast levels and the brew method, and changing only one variable at a time between trials.
Changing one variable at a time is what makes a journal useful. Suppose you change the proportions and the grind setting in the same trial. You will not know which change caused the difference you taste.
What to record for each blend
- Trial ID: a short label such as T1, T2 or T3 so you can refer back to it.
- Component identity: the name on each bag, so you can find the same coffee again.
- Roast information: the roast level or roast details printed on the label, if given.
- Component weights: the measured grams of each coffee in the blend.
- Total blend weight: the sum of all component weights.
- Percentages: each component's share of the total.
- Brewing details: method, dose, water, grinder setting and any other conditions you track.
- Observations: a brief note on what you tasted and whether you liked it.
- Next step: the single change you plan for the next trial.
How to calculate blend percentages
Divide each component's weight by the total blend weight and multiply by 100. The percentages should add up to 100. Percentages let you compare blends of different sizes, because a 60:40 blend means the same thing whether you mix 20 grams or 200 grams.
component percentage = component grams ÷ total blend grams × 100
Illustrative example: you make a 20 g blend from 12 g of coffee A and 8 g of coffee B. Coffee A is 12 ÷ 20 × 100 = 60%, and coffee B is 8 ÷ 20 × 100 = 40%. This blend is 60% A and 40% B. These numbers only show how the calculation works. They are not a recommended recipe.
Keep blend composition separate from your brew ratio
A blend journal tracks two different kinds of numbers, and it helps to keep them apart. Blend composition describes how the coffees relate to each other. Brew ratio describes how the total coffee dose relates to the water.
Continuing the example: if you brew that 20 g blend with 300 g of water, your coffee-to-water ratio is 1:15, because 300 ÷ 20 = 15. The 60:40 composition and the 1:15 ratio measure different things. You can change one without the other. A 50:50 blend can be brewed at 1:15, and a 60:40 blend can be brewed at a different ratio. Record both, in separate fields.
When you mix a larger batch
If you mix more blend than you brew at once, record the batch and the brew separately. For example, you might mix 100 g at 60:40, using 60 g of coffee A and 40 g of coffee B. If you then brew 20 g of that batch, log the 100 g batch composition in one place and the 20 g dose in your brewing details. This makes it clear which numbers describe the blend and which describe a single cup.
A comparison worksheet you can copy
Use one row per trial. Leave a field blank if you didn't measure it rather than guessing. If you already keep a detailed tasting sheet, write its reference in the observation field instead of copying everything over.
| Field | Trial T1 | Trial T2 |
| Component grams and percentages | A 12 g (60%), B 8 g (40%) | A 10 g (50%), B 10 g (50%) |
| Total dose | 20 g | 20 g |
| Brewing method and recipe reference | ||
| Grinder setting | ||
| Water mass | 300 g | 300 g |
| Recorded temperature | ||
| Brew time | ||
| Beverage yield (if measured) | ||
| Brief personal observation | ||
| Next composition to compare |
Comparing trials and deciding what to keep
To compare two blends fairly, change only the composition and plan to brew both under the same conditions. In the illustrative worksheet, trial T2 uses 10 g of A and 10 g of B, a 50:50 blend. It keeps the same 20 g dose and 300 g of water as T1. If anything actually differed when you brewed it, such as the grind or the timing, write that down. It may explain a difference you tasted.
After tasting, label your notes as your own results for those specific trials, then pick one of three actions:
- Repeat: you liked it and want to confirm you can get the same result again.
- Revise: it's close, so adjust one variable, often a component's percentage, and log the result as a new trial.
- Retire: it didn't suit you, so note why and move on.
Over several trials, the journal becomes a record of your own preferences. Each blend you keep comes with the exact weights, percentages and brewing details you need to make it again.
Related articles
What Does the 80/20 Rule Mean for Coffee?
Discover how the 80/20 rule applies to coffee brewing. Learn about the 80/20 ratio, how small adjustments affect flavor, and how to find your perfect cup through simple experiments.
Record coffee particle-size distributions using Gagné’s image procedure
A step-by-step guide to photographing ground coffee, calibrating the image, detecting particles and recording a particle-size distribution with Gagné’s method, kept separate from sieve fractions and grinder settings.
Calculate Home-Brewed Coffee Ingredient Cost per Serving
Work out what each cup of home-brewed coffee costs in ingredients, using your own prices, a printable worksheet, spreadsheet formulas and a savings comparison.
Record coffee dose, water and timer events with an Acaia Pearl
How to use the original Acaia Pearl's tare, timer and brewing modes to separately log equipment weight, dry coffee dose, water added, beverage weight and brew time.
Calculate coffee TDS and extraction yield and read the SCAA drip-brewing chart
How TDS, beverage-based extraction yield, brew ratio and taste differ, how to calculate extraction from refractometer readings, and how to read the 2016 SCAA drip-brewing chart.
Iced pour-over coffee: recording hot water, ice and dilution
How to plan and log an iced pour-over: separate entries for coffee dose, hot extraction water, brewing ice, measured beverage and later serving ice or water, with one worked recipe example.
Recording brewing water: labels, minerals and measurements
How to document the water behind each home coffee brew: source, label minerals, treatment and real measurements, kept separate from brewed-coffee TDS and tasting notes.
Coffee scoops, tablespoons and grams: recording measurements
How to turn coffee scoops and tablespoons into grams, weigh and record your own scoop, convert common doses, and use a simple coffee-to-water ratio at home.
What Is a Bloom Ratio? How the Coffee Bloom Works and What the Evidence Supports
What a bloom ratio means in pour-over coffee, how the bloom differs from your total brew ratio, and the steps and timing the sources support, with clear notes where details are missing.
Coffee Grind Size Chart: Matching Grind to Brewing Method and Extraction
A practical coffee grind size chart from finest to coarsest, how grinding methods differ, and how to adjust grind to your brewing method. Unverified details are flagged.