Setting Up a Side-by-Side Coffee Tasting at Home
A practical guide to a home side-by-side coffee tasting: identical cups, labelled samples, light-to-darker tasting order, a simple brew ratio, structured notes, and the details sources leave unconfirmed.
Contents
A side-by-side tasting puts several coffees in front of you at the same time, prepared the same way, so the differences between them become easier to notice and record. This guide covers what to gather, how to order and label the samples, how to brew them consistently, and how to take notes you can use later. Some brewing and tasting guidance comes from home-tasting and cupping guides that could only be reviewed in short excerpts. Where an important detail could not be confirmed, the guide says so instead of filling the gap with a guess.
What a side-by-side tasting is for
The goal is comparison, not perfecting one cup. Each coffee is brewed and served the same way, so contrasts in acidity, body, and flavor stand out more clearly than they would on different days. This is useful when you want to choose between beans, understand how roast level or processing changes a cup, or share a few coffees with guests in an organized way. It is a home brewing and journaling exercise. It is not professional cupping, and it does not certify anyone's palate. Your notes describe what you and your guests noticed on that occasion, not a definitive verdict on any coffee.
Equipment and supplies
- Identical cups or bowls, one set per coffee. Home-tasting advice stresses identical cups. One hosting guide calls for white porcelain cupping bowls of roughly 6 to 8 oz capacity.
- A spoon for each taster. The same guide specifies metal tasting spoons for each participant.
- A digital scale. The guide recommends one accurate enough for small amounts, but the exact precision it suggests was cut off in the available excerpt and could not be confirmed.
- A kettle capable of near-boiling water, plus a way to check temperature if you want to aim for the roughly 205°F mentioned in one cupping guide.
- A timer that counts up.
- A coffee flavor wheel to help put tastes into words.
- Labels or cards to mark each sample, and paper or a notebook for each taster.
- The coffees themselves, with their bags kept nearby so you can refer to roast level and processing details printed on the label.
Substitution: if you don't own porcelain cupping bowls, the more general advice is simply to use identical cups. Matching vessels matter more than the specific type, because different shapes or colors could influence how the coffees are perceived. No source reviewed here evaluated particular cup materials against one another.
Choosing how many coffees to taste
A coffee-roasting discussion about tasting with guests recommends three coffees at most, ideally ones with an interesting story behind them. That advice was given in the context of presenting coffees to guests, but keeping the lineup small also makes a home comparison easier to manage. Another beginner's guide addresses how many coffees to include in one session, but its recommendation was cut off in the available excerpt, so it could not be confirmed. The professional-style setup that calls for six cupping bowls doesn't say in the available text whether that means six coffees or several bowls per coffee. If you're unsure, starting with two or three coffees is consistent with the advice that could be verified.
Ordering the samples
One hosting guide recommends starting with the lightest roast, which it describes as high in acidity and low in body, so your palate stays sensitive. From there it moves to a medium-roast, washed-process coffee for balance. The rest of its sequence was not available, so how it handles darker roasts or other processing methods could not be confirmed. A practical approach is to arrange your coffees from lightest to darkest roast, using the roast information on each bag, and taste them in that order.
Step-by-step setup
- 1. Choose your coffees, keeping the number small. Three at most is the recommendation that could be verified.
- 2. Read each bag and note the roast level and processing method, then put the coffees in order from lightest to darkest roast.
- 3. Assign each coffee a label, such as A, B, and C. Write down which coffee matches which label, but keep that list out of sight if you want tasters to compare without knowing which coffee is which. This blind option is a common way to reduce bias, though the sources reviewed here don't address it.
- 4. Set out identical cups for each coffee, in tasting order, with its label clearly visible.
- 5. Weigh the coffee. One setup suggestion uses a simple ratio of 8 g of coffee to 130 ml of water. Use the same ratio for every sample so the comparison stays fair.
- 6. Grind the coffee. The grind size for this method could not be verified from the available material. Whatever grind you choose, keep it the same for every coffee.
- 7. Heat the water. One cupping guide calls for near-boiling water at about 205°F, poured at 4 to 6 oz per vessel so the vessel is filled. The 130 ml in the ratio above is about 4.4 oz, which falls within that range.
- 8. Pour water onto the grounds and start a timer that counts up. The same guide continues past this point, but its instructions for how long to steep and what to do next were cut off, so the steeping time and the method for handling the grounds before tasting could not be verified.
- 9. Taste the coffees in order, using a clean spoon or rinsing between samples, and write down your observations for each label before moving on.
- 10. When everyone has finished, compare notes, and reveal which coffee is which if you tasted blind.
What is confirmed and what is still a gap
| Detail | Status |
| Identical cups for every sample | Supported by home-tasting setup advice |
| Number of coffees | Three at most suggested in one discussion; another guide's number unavailable |
| Tasting order | Lightest roast first, then medium washed; later steps unavailable |
| Coffee-to-water ratio | 8 g to 130 ml suggested as a simple ratio |
| Water amount and temperature | 4 to 6 oz of near-boiling water, about 205°F, in one cupping guide |
| Grind size | Not available in supplied material |
| Steeping time | Not available; the excerpt stops after starting the timer |
| Handling grounds before tasting | Not available |
| Scale precision | Mentioned but value not available |
Recording your observations
Structured notes are what turn a side-by-side tasting into something you can revisit. A flavor wheel gives tasters shared words for what they notice. One coffee brand's post points out that a coffee may not taste the same from the first sip to the last. The available excerpt doesn't explain how or why, so that is not offered here as an established fact. Logging when each sip was taken lets you check your own cups for changes over time. A simple note template, one line per sample:
Date: Tasters:
Ratio used: Water temp: Grind:
Label | Coffee (reveal later) | Roast / process | Time of sip | Acidity | Body | Flavor wheel words | Notes
A | | | | | | |
B | | | | | | |
C | | | | | | |
How to judge the result
The setup is working when each labelled sample is easy to tell apart on paper and the notes reflect the differences you expected the arrangement to reveal. With a light-to-darker sequence, one cue that matches the guidance reviewed here is that the lightest roast should come across as higher in acidity and lighter in body than the samples that follow. If your notes for every cup are nearly identical, look at your process before concluding that the coffees are the same. Did every sample get the same ratio, water, and timing? No source supplied here offers cues for knowing when a cup has finished steeping or is ready to taste, so that judgment can't be guided by verified indicators.
Corrections when something seems off
The most reliable fix the supplied guidance supports is restoring consistency: identical cups, the same ratio, the same water, the same order every time. If a result surprises you, repeat the comparison with every variable held constant before changing anything else. Specific corrections for bitter, sour, weak, or muddy cups, such as grind or time adjustments, could not be verified from the available material, so none are prescribed here.
Safety
The brewing step uses near-boiling water, about 205°F in the guide reviewed. Pour carefully, keep full vessels where they won't be knocked over, and let guests know the cups are hot before they pick them up or taste. No other safety guidance was available in the supplied material, and this guide makes no claims about health effects of caffeine or coffee.
Read next
Record a Bruer cold-drip brew from setup to beverage yield
A practical log for a Bruer cold-drip session: method check, Bruer's setup quantities, drip-rate counting, timing events, collected beverage and cleanup notes.
Organize Existing Coffee Equipment Around Your Brewing Workflow
Set up a DIY home coffee station using only what you own: map your brewing sequence, group tools by use, check placement, and record a repeatable routine.
Keep a personal tasting record as one coffee brew cools
A practical guide to recording successive tasting notes from a single coffee brew as it cools, using elapsed time, measured temperatures and clear comparisons.
Identify and record your espresso machine's preinfusion phase
How to find your espresso machine's documented preinfusion phase, copy its controls and units, and log observed phase events in a brew journal tied to each shot.
Interpret and record espresso pressure readings in context
Looking for the optimal bar pressure for espresso? Learn what your gauge actually measures, how to tell a setting from a reading, and how to log pressure so your numbers can be compared.
Record espresso basket dimensions, dose ratings and headspace
58mm espresso baskets share a diameter but differ in depth and dose range. How to record basket specs, actual doses and headspace checks without guessing at fit.
Record espresso pressure and flow profiles as separate observations
Build a stage-by-stage espresso profile record that keeps intended settings, measured pressure, measured flow and inferred curve segments apart.
Record a Nel Drip Recipe, Pouring Sequence and Beverage Yield
Build a cloth-filter brewing journal that keeps the author's nel drip method intact, logs each pour and pause as it happens, and records beverage yield as its own measurement.
Build a model-specific percolator brewing journal
Record your percolator's model, instructions, heat source, brewing events and completion cues so you can repeat a stovetop or electric routine and compare recipes fairly.
Document espresso spraying and uneven flow before changing preparation
Build a repeatable espresso observation record that separates what you saw, like spraying or uneven flow, from what you suspect caused it and what you change next.