Compare Dripper Geometry, Filter Fit and Coffee-Bed Records
Compare CAFEC Flower, Deep 27, Deep 45, Kalita Wave 185 S and Kalita 102-D by shape, outlets, dedicated paper and serving designation, then record dose and bed depth.
Contents
The short answer
A pour-over dripper's geometry and its matching paper filter together decide how the coffee bed sits. A steep cone holds grounds in a tapering point, a flat-bottom brewer spreads them across a level base, and a dedicated filter is what makes either shape work as the maker intended. To compare drippers fairly at home, pair each one with the paper its manufacturer specifies, keep the maker's serving designation as written, and record your actual dry dose, the bed depth you observe and the stage when you measured it. Those records describe your own brews. They do not prove that one shape is faster or better tasting in general.
Key terms in plain English
- Cone dripper: a funnel that narrows toward a single point, so the coffee bed is deepest at the center.
- Flat-bottom dripper: a brewer with a level base, so the bed spreads across a wider floor.
- Trapezoid or wedge dripper: a common category name for brewers whose sides slope toward a narrow, flat base rather than a point. Record the profile you actually see instead of relying on a label.
- Cone angle: the opening angle of a cone. A smaller number, such as 27°, describes a narrower, steeper cone than 60°.
- Bed depth: how tall the layer of grounds is in the filter. Note whether you measured it dry, right after the first wetting (the bloom), or after drawdown.
- Drawdown: the period when the last water drains through the bed after pouring stops.
- Arita ware: Japanese porcelain associated with the Arita area of Saga Prefecture.
- AS resin: acrylonitrile styrene, a rigid, clear plastic used for some drippers.
How the CAFEC and Kalita arrangements compare
The table uses only details the manufacturers publish. Serving designations appear exactly as each maker states them. A cup count or a number of people is not a gram capacity, and different makers do not define a cup the same way.
| Arrangement | Shape as described by the maker | Material | Serving designation | Specified paper | Other published details |
| CAFEC Flower Cup1 / Cup4 | 60° cone | Arita ware or AS resin | Cup1 and Cup4 sizes | CAFEC cone paper | CAFEC presents the flower-pattern ribs as a design feature |
| CAFEC Deep 27 | 27° cone | Not stated in the supplied details | One cup | Abaca+ Deep27 paper only | CAFEC illustrates a 12 g dose and advises against folding ordinary cone paper to fit |
| CAFEC Deep 45 | Deep cone with a hexagonal structure, per CAFEC | Arita ware | 3–7 cups | Deep 45 Special paper | Separate design from Flower and Deep 27 |
| Kalita Wave 185 S (code 05151) | Flat bottom | Stainless steel | 2–4 people | Wave Filter 185 only | Three drainage holes; the filter has 20 waves; the listed 120 × 120 × 80 mm is the package size, not the brewer |
| Kalita 102-D (code 05001) | Record your observed profile | AS resin | 2–4 people | 102 filter paper (paired in the 102-D Set N with a 500 Server N) | Kalita describes its drippers as three-hole designs; body 126 × 106 × 85 mm, 68 g |
Which arrangement suits your purpose
Decide on the same few criteria for each brewer: batch size, shape, outlet arrangement, paper availability and material.
- Single cups: CAFEC Deep 27 is designated for one cup, and Flower Cup1 is the smaller Flower size. Both are cones, but at different angles, so beds from the same dose are likely to sit at different heights. Measure the beds rather than assuming they match.
- Small batches for two to four people: both the Kalita Wave 185 S and the 102-D carry a 2–4 person designation. They differ in material, stainless steel versus AS resin, and in paper, Wave Filter 185 versus 102 filter paper. The Wave pairs a flat bottom with three holes and a 20-wave filter.
- Larger batches: CAFEC lists Deep 45 for 3–7 cups. Flower Cup4 is the larger Flower option.
- Material preference: Flower comes in Arita porcelain or AS resin, Deep 45 in Arita ware, the Wave 185 S in stainless steel and the 102-D in AS resin. Material affects weight, handling and how you preheat the brewer. The supplied manufacturer details do not rank materials by flavor.
- Paper commitment: every arrangement here has a named filter. The Wave 185 S is exclusively paired with Wave Filter 185, and CAFEC specifies dedicated paper for Deep 27 because a folded standard cone filter has a different shape and overlapping layers. If you can't easily get a model's paper, that is a practical reason to choose a different brewer.
Manufacturer descriptions of better extraction are promotional claims, not side-by-side measurements. Treat any flow or flavor difference as something to observe in your own records, not as a built-in property of cones or flat bottoms.
How to record dose and bed depth
Apart from the 12 g dose CAFEC illustrates for Deep 27, these details include no published dose guidance, so check each arrangement's current instructions before you set a dose. Then keep one record per brew with the same fields every time.
- Exact model, size and material, for example Flower Cup1 in AS resin.
- The profile you observe: cone, flat bottom or wedge.
- Published dimensions, noting whether they describe the body or the packaging.
- Outlet arrangement, such as one opening or three holes.
- The maker's serving designation, copied as written.
- The paper used, by its exact product name.
- Actual dry dose in grams, weighed.
- Bed depth, plus the stage it was measured: dry, after the bloom or after drawdown.
- Pour events: the time and amount of each pour.
- Drawdown time, if you track it.
- Tasting notes and any variable you changed, such as grind, water temperature or kettle.
Model/size/material:
Observed profile:
Dimensions (type):
Outlets:
Serving designation (as stated):
Paper:
Dry dose (g):
Bed depth / stage:
Pours (time, g):
Drawdown:
Changed variables:
Tasting notes:
Illustrative example: two records at the same dose
This is a hypothetical planning example, not a test result. Suppose you want to compare a Kalita Wave 185 S with Wave Filter 185 against a Kalita 102-D with 102 filter paper, both designated for 2–4 people. After checking each brewer's instructions, you settle on an 18 g dose for both, recorded as A and B. You measure dry bed depth in each brewer the same way, then repeat the measurement after the bloom. You keep grind, water and pour schedule identical, and you write down anything that differed. If record B drains faster than record A, that statement describes those two sessions under those conditions. It does not show that one shape always drains faster. A separate one-cup comparison could set CAFEC Deep 27 at its illustrated 12 g beside Flower Cup1. Keep that pairing in its own records rather than mixing it with the 18 g sessions.
Common mistakes to avoid
- Swapping papers between systems. Deep 27, Deep 45 and Flower each use different CAFEC paper, and Kalita pairs the Wave and the 102-D with different filters.
- Treating packaging dimensions as brewer dimensions. The Wave 185 S figure of 120 × 120 × 80 mm describes the box.
- Converting a cup or person designation into grams or milliliters.
- Comparing bed depths taken at different stages, such as dry in one brewer and after the bloom in another.
- Changing grind or pour pattern between brewers and then crediting the difference to shape.
Related articles
Record a Bruer cold-drip brew from setup to beverage yield
A practical log for a Bruer cold-drip session: method check, Bruer's setup quantities, drip-rate counting, timing events, collected beverage and cleanup notes.
Organize Existing Coffee Equipment Around Your Brewing Workflow
Set up a DIY home coffee station using only what you own: map your brewing sequence, group tools by use, check placement, and record a repeatable routine.
Keep a personal tasting record as one coffee brew cools
A practical guide to recording successive tasting notes from a single coffee brew as it cools, using elapsed time, measured temperatures and clear comparisons.
Identify and record your espresso machine's preinfusion phase
How to find your espresso machine's documented preinfusion phase, copy its controls and units, and log observed phase events in a brew journal tied to each shot.
Interpret and record espresso pressure readings in context
Looking for the optimal bar pressure for espresso? Learn what your gauge actually measures, how to tell a setting from a reading, and how to log pressure so your numbers can be compared.
Record espresso basket dimensions, dose ratings and headspace
58mm espresso baskets share a diameter but differ in depth and dose range. How to record basket specs, actual doses and headspace checks without guessing at fit.
Record espresso pressure and flow profiles as separate observations
Build a stage-by-stage espresso profile record that keeps intended settings, measured pressure, measured flow and inferred curve segments apart.
Record a Nel Drip Recipe, Pouring Sequence and Beverage Yield
Build a cloth-filter brewing journal that keeps the author's nel drip method intact, logs each pour and pause as it happens, and records beverage yield as its own measurement.
Build a model-specific percolator brewing journal
Record your percolator's model, instructions, heat source, brewing events and completion cues so you can repeat a stovetop or electric routine and compare recipes fairly.
Document espresso spraying and uneven flow before changing preparation
Build a repeatable espresso observation record that separates what you saw, like spraying or uneven flow, from what you suspect caused it and what you change next.