Record grinder settings and their model-specific reference
How to write down hand grinder settings so a click count, a printed dial mark and a manufacturer's zero reference never get confused, plus a reusable record template.
Contents
- The short answer
- What the numbers on a grinder actually mean
- Three terms to keep apart
- What to include in a setting record
- Writing the setting so it can be repeated
- Logging changes
- Illustrative example
- Model-specific references: Kingrinder K6, Timemore C3 ESP Pro, Alpaca and others
- Using the record when you adjust
The short answer
A grinder setting like "18 clicks" or "mark 12" only means something when it is tied to a specific grinder, a specific burr set and a specific starting point. Click counts shared on Reddit and in brewing groups usually break down because people count from different references. To make a setting repeatable, record three separate things: what the dial physically shows, how the manufacturer defines its reference or zero for that exact model, and the position you actually use for a given recipe. Keep them in separate fields and never merge them into one number.
What the numbers on a grinder actually mean
Numbers, dots and clicks on a grinder dial are position markers on that particular unit. They are not a universal unit of fineness. A "12" on one model has no fixed relationship to a "12" on another, and even on the same model the result depends on the installed burrs and on where the count starts. That is why a click count copied from someone else's grinder is a starting guess at best, and only if the model, burr option and reference point all match yours.
Three terms to keep apart
- Printed zero: a visible marking on the dial or scale. Record it exactly as it appears, including any photograph of the dial.
- Manufacturer reference: the zero or reference point as the manual for your exact model defines it. Transcribe the manual's wording rather than paraphrasing it, and note which manual and section it came from.
- Recipe setting: the position you use for a named recipe, written in the same notation every time (clicks from the reference, a dial number, or rotations plus clicks).
If the manual for your grinder does not clearly define a reference, leave that field marked as unresolved. Do not fill it with a guess, and do not assume it means the point where the burrs touch unless the manual says so. A recorded observation such as "dial shows mark 12" stays useful even when the reference is unknown; translating it into clicks or another model's scale is where errors creep in.
What to include in a setting record
YARRAMATE's suggested record covers the grinder model, the installed burr option, a photograph of the dial and the recipe details. Its checklist also asks you to find the exact instructions for your grinder before changing anything, and to record rotation counts where the grinder's adjustment goes past one full turn. A fuller worksheet builds on those prompts:
GRINDER SETTING RECORD
Manufacturer: ______________________
Exact model: ______________________
Unit identifier: ______________________ (your own label, e.g. G-01)
Installed burrs: ______________________
Manual title/revision: ______________________
Relevant manual section: ______________________
Printed scale markings: ______________________ (as they appear on the dial)
Manufacturer reference: ______________________ (quote the manual, or "not established from manual")
Dial photo taken: yes / no date: __________
Recipe name/ID: ______________________
Recipe setting: ______________________
Notation used: clicks from reference / dial number / rotations + clicks
Writing the setting so it can be repeated
Pick one notation per grinder and stick to it. If your grinder's adjustment wraps around more than once, a bare number is ambiguous; write the rotation and the position within it, for example "1 rotation + 6" rather than "6". Always state what the count is measured from, using the manufacturer-reference field. A dial photo taken at the recipe setting removes most doubt when you return to it weeks later.
Logging changes
Keep a running log so you can tell an ordinary grind adjustment apart from a recalibration of the reference itself. Mixing the two is the most common reason a familiar setting suddenly stops producing the same cup.
| Date | Previous setting | New setting | Ordinary adjustment or calibration | Manual section | Recipe ID | Observed response |
| ______ | ______ | ______ | ______ | ______ | ______ | ______ |
Only record capabilities that are documented for your actual unit. If the manual does not describe a recalibration procedure, log the change as an ordinary adjustment.
Illustrative example
This is a hypothetical record, not a recommended setting. Unit G-01 has a photographed dial position entered as "mark 12" for a pour-over recipe labeled PO-1. The manufacturer-reference field reads "not established from manual". The record keeps the observation as "mark 12" and does not convert it into a click count, a burr gap or an equivalent setting on another grinder. If the owner later finds the manual's reference definition, they fill in that field, note the manual section, and add a log entry; the original "mark 12" observation stays unchanged.
Model-specific references: Kingrinder K6, Timemore C3 ESP Pro, Alpaca and others
How to zero or calibrate a particular grinder, and what its markings represent, is defined by that manufacturer for that model and burr configuration. Take the reference from the manual or the manufacturer's own instructions for your exact unit and transcribe it into the manufacturer-reference field. Do not carry a zeroing method or click chart from one model to another, including between variants that share a name. Settings posted for these grinders on forums are only comparable to yours once you confirm the poster used the same model, the same burrs and the same reference point.
Using the record when you adjust
- Before turning the dial, read the instructions for your exact model and note the relevant section.
- Photograph the dial at its current position and log it as the previous setting.
- Make the change in small steps and write the new position in your chosen notation.
- Mark whether the change was an ordinary adjustment or a calibration of the reference.
- Note the recipe you brewed and how the cup tasted, so the next adjustment starts from evidence rather than memory.
Read next
Record a Bruer cold-drip brew from setup to beverage yield
A practical log for a Bruer cold-drip session: method check, Bruer's setup quantities, drip-rate counting, timing events, collected beverage and cleanup notes.
Organize Existing Coffee Equipment Around Your Brewing Workflow
Set up a DIY home coffee station using only what you own: map your brewing sequence, group tools by use, check placement, and record a repeatable routine.
Keep a personal tasting record as one coffee brew cools
A practical guide to recording successive tasting notes from a single coffee brew as it cools, using elapsed time, measured temperatures and clear comparisons.
Identify and record your espresso machine's preinfusion phase
How to find your espresso machine's documented preinfusion phase, copy its controls and units, and log observed phase events in a brew journal tied to each shot.
Interpret and record espresso pressure readings in context
Looking for the optimal bar pressure for espresso? Learn what your gauge actually measures, how to tell a setting from a reading, and how to log pressure so your numbers can be compared.
Record espresso basket dimensions, dose ratings and headspace
58mm espresso baskets share a diameter but differ in depth and dose range. How to record basket specs, actual doses and headspace checks without guessing at fit.
Record espresso pressure and flow profiles as separate observations
Build a stage-by-stage espresso profile record that keeps intended settings, measured pressure, measured flow and inferred curve segments apart.
Record a Nel Drip Recipe, Pouring Sequence and Beverage Yield
Build a cloth-filter brewing journal that keeps the author's nel drip method intact, logs each pour and pause as it happens, and records beverage yield as its own measurement.
Build a model-specific percolator brewing journal
Record your percolator's model, instructions, heat source, brewing events and completion cues so you can repeat a stovetop or electric routine and compare recipes fairly.
Document espresso spraying and uneven flow before changing preparation
Build a repeatable espresso observation record that separates what you saw, like spraying or uneven flow, from what you suspect caused it and what you change next.